|
Post by Rusty on Sept 15, 2014 22:58:07 GMT 12
ok people how can snz demand competitors pay to have their engine checked ,how legal is that some super drivers will just tell snz to piss of and see you in court. Ask anyone. See you in court snz and you can get away with anything
|
|
|
Post by insane1 on Sept 16, 2014 8:26:44 GMT 12
who actually decides if this rule goes ahead ,hardly fair to the racer to make them pay for motor strip down and rebuild .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 16, 2014 16:35:26 GMT 12
|
|
|
Post by beachboy on Sept 16, 2014 21:15:22 GMT 12
and yet it seems it is the competitors themselves that want it done this way, I'm assuming the most the 60+ submissions were from competitors of the class.
" the majority of submissions expressed a desire to see the existing rules enforced, no matter what the cost of disassembly would be to establish compliance. This has been accepted by the Board and the existing Rule T11-1-2(b) remains in place."
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 16, 2014 21:34:45 GMT 12
may be true beach boy - but I will still bet my race car and everything else in my garage that any competitor who gets asked to foot the bill will be pretty pissed off!
Some of those engines are in excess of $80,000.00 after all, thats almost double my last years wage.
|
|
|
Post by beachboy on Sept 18, 2014 21:14:53 GMT 12
any motors costing that sort of money would be striped down and inspected as maintenance every few meeting anyway wouldn't they?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 18, 2014 22:41:06 GMT 12
Fair bit of the money is in assembly to begin with - thats if its a profesionally built motor - they tend to be built for a season in speedway cars, not for a few meetings.
With the big dollar speedway ones every few meetings you change oil, radiator fluid, filters, spark plugs and leads - thats every fifth or so meeting for some cars and alot less for others, one that my family worked on had that happen every two meetings..
this is all from what ive been told and what my family used to do though - for most people its gonna be different.
|
|
|
Post by insane1 on Sept 27, 2014 18:16:36 GMT 12
Okay then how does this then apply to big block dart heads.
|
|
|
Post by chris13w on Sept 27, 2014 23:36:12 GMT 12
Some of those engines are in excess of $80,000.00 after all, thats almost double my last years wage. I'd be looking for a better job
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 28, 2014 9:13:19 GMT 12
Some of those engines are in excess of $80,000.00 after all, thats almost double my last years wage. I'd be looking for a better job I couldnt find one that suits me better Ive tried too...
|
|
|
Post by midway on Sept 28, 2014 9:25:58 GMT 12
Yes some folk have all the luck ,including checking the lotto tickets this morning .
|
|
|
Post by tank11 on Sept 28, 2014 10:00:55 GMT 12
Yes some folk have all the luck ,including checking the lotto tickets this morning . Wahooo.
|
|
|
Post by nakifans on Dec 22, 2014 8:05:56 GMT 12
QUOTE FRON SNZ AUG 2014 UPDATE. Super Saloon Valve Rules Unchanged Plus WARNING The proposal was to delete rule entirely, with one of the reasons for the suggestion being that it is difficult to confirm compliance with existing rules once an engine has been assembled. However, the majority of submissions expressed a desire to see existing rules enforced, no matter what the cost of disassembly would be to establish compliance. This has been accepted by the board and the existing rule T 11-1-2 remains in place. A complicating factor that emerged from the feedback was the issue of valve cant. However, cant is not mentioned in the rules currently, and is therefore not required to be measured or able to be enforced, as other rules state that engine modifications are permitted. COMPETITORS SHOULD BE AWARE THAT SNZ WILL BE SELECTING ENGINES TO BE TESTED FOR COMPLIANCE WITH THIS RULE DURING THE SEASON, AND THE COST OF DISASSEMBLING AND REASSEMBLING THE ENGINE TO DETERMINE COMPLIANCE WILL BE BORNE BY THE COMPETITOR. We therefore suggest that competitors who are able to do so take the opportunity to have a technical steward inspect their valve angle and seal their engine before the start of the season. The only cost in this instance is the mileage involved in getting a tech steward to the place of inspection. My feeling is before placing a bet on the NZs at the TAB make sure your car complies with the above rulings as this would be the ideal opportunity for SNZ to enforce the rulings as a lot of debate and feed back came from the class competitors on this matter.
|
|
fan
New Member
Posts: 21
|
Post by fan on Dec 22, 2014 9:09:24 GMT 12
We have saloons which is a restricted class, then we have supersaloons, why can't they be just that, super, anything goes, do whatever, spend whatever, its the class to do it in, the only rule in this class should be body must match motor, and drivers safety. That's it. Clear cut, no f.....g around
|
|