|
Post by Pirate Racing NZ on Mar 23, 2017 20:47:50 GMT 12
I need a hub/rotor that is 255mm diameter, 70mm high, 21.3mm ish rotor thickness and Holden five stud patten. Height can go up to 82mm. Off my saloon car and don't know what it came off originally. It is vented. Any ideas?
|
|
|
Post by lsuakme on Mar 23, 2017 22:54:42 GMT 12
Judging by those measurements i would guess its somewhat of a stock sized rotor? I have after market on my VN circuit car and if you want i can go take a few measurements if you were thinking of upgrading. It fits behind a 16" rim and has a c3 corvette 2 pot calliper on it, i know i paid roughly 300 for a pair, fit to holden studs (5x120)
|
|
|
Post by Pirate Racing NZ on Mar 24, 2017 7:44:15 GMT 12
Am hoping to find out what it is off so I don't have to reinvent. Is a. Cast item and must have come off something.
|
|
|
Post by atmosports on Mar 24, 2017 9:17:06 GMT 12
Shoot into BNT/Autostop with those measurements & have a flick through their catalogues or have a look on the DBA website & see what you can find
|
|
|
Post by Pirate Racing NZ on Mar 24, 2017 14:41:53 GMT 12
bnt are two doors down and yes, also viv at napier brake and clutch, brakes plus, proparts, dba, znolli, trw, summit racing, bendix, nz brake, nzad, partmaster and everything I could find online. May have missed someone. Not giving up, too stubborn.
|
|
Les
Full Member
Posts: 190
|
Post by Les on Mar 25, 2017 0:35:09 GMT 12
|
|