Les
Full Member
Posts: 190
|
Post by Les on Nov 17, 2017 21:57:23 GMT 12
Hey guys. I'm running an AU vct intech motor in my stocky and need to replace the plugs. As it's a standard motor, running on 98 pump gas, what plugs should I be running? I've tried BPR6ES and they fouled up under load in one lap. Any suggestions?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2017 1:57:49 GMT 12
cant you simply change the gap on them ?
|
|
Les
Full Member
Posts: 190
|
Post by Les on Nov 18, 2017 4:58:41 GMT 12
Gapped at .11. Wouldn't think it'd need more than that running standard.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2017 11:15:03 GMT 12
see if you can get two steps hotter, leave the gap and lean out your carb a fraction. Sounds like its too rich.
|
|
Les
Full Member
Posts: 190
|
Post by Les on Nov 18, 2017 13:14:33 GMT 12
So that would be a BPR4ES?
|
|
stevo
Full Member
Posts: 147
|
Post by stevo on Nov 21, 2017 21:14:47 GMT 12
Use a ngk b7es and gap them to 1mm
|
|